What tools can be used to remove dust on the surface of IP65 SLIMLINE batten lighting?

The following tools can be used to remove the dust on the surface of IP65 SLIMLINE batten lighting:
Soft brush: Choose a soft bristled brush, such as a wool brush or makeup brush, to gently brush away the dust on the surface of the lamp. A soft brush can effectively remove dust without damaging the surface of the lamp.
Air pressure dust blower: Using an air pressure dust blower can quickly and effectively blow away surface dust, especially in small structures or difficult to reach areas of lighting fixtures. Make sure to choose the appropriate pressure to avoid damage to the lighting fixtures.
Clean Soft Cloth: Use a clean soft cloth, such as pure cotton or microfiber cloth, to gently wipe the surface of the lamp to remove residual dust and dirt. Ensure that the fabric is soft to avoid scratching the surface of the lamp.
Wet cloth: When cleaning the surface of lighting fixtures, sometimes a wet cloth may be needed to help remove stubborn stains or dirt. Before using a damp cloth, make sure to turn off the power to the lamp and ensure that the cloth does not drip water into the interior of the lamp.
Soft sponge: For larger dust or dirt, a damp soft sponge can be used to gently wipe the surface. Make sure the sponge is soft enough again to avoid scratching or damaging the surface.
When selecting tools, ensure that they are soft enough and do not cause damage to the surface of the lamp. Avoid using hard or rough tools to avoid scratching or damaging the surface of IP65 SLIMLINE batten lighting.